|
Shared Left Border
| |
If you just need a mobile phone
unlocking, please use our
Unlocking Services
|
NEW ADD-ON
UBL Magic Test Point
NEW ADD-ON |
NEW
Now available
the Z3 UBL Magic TP
NEW
Now available
the K1 KRZR UBL Magic TP
NEW
Now available
the U6 UBL Magic TP
NEW
Now available
the L7 UBL Magic TP
UBL Magic TP for developed by UBL team.
These
amazing gadgets are a breakthrough for any Z3, K1, U6, L7, V3, V3r, V3i including bootloader 0A.52.
No more cutting access to testpoints just press the magic button to
ground the testpoint and unlock / service any bootloader versions
Because at the moment
no unlocking equipment can unlock v3r, V3i etc. with bootloader version 0A.52 without
cutting access to the testpoint, this gadget does all the work for
you at the touch of a button
Any variation of v3 models with boot
0A.52 can be unlocked with this, but also all other bootloaders too
!!. This UBL Magic Test Point is really very easy to use for any
one, even for those people which have NO TECHNICAL knowledge. You
wont loose phone warranty, and you unlock phones in seconds.
NEW
Now available
the Z3 UBL Magic TP
NEW
Now available
the K1 KRZR UBL Magic TP
NEW
Now available
the U6 UBL Magic TP
NEW
Now available
the L7 UBL Magic TP
Key features:
- No need to cut or de-solder any
metal shield on Motorola V3
- Can unlock boot 0A.52 in few seconds without any damage to phone
- No need to void phone warranty
- Compatible with all other service tools including: (G.O.T.,
Smart-Clip, MSS4 etc..)
|
Order
UBL Magic Test Points For V3, K1, U6 & L7 |
|
|
Note: service equipment is needed
to use this add-on
How To Use with USB PC based systems
(Ultima Box Light,
MSS4, Mss4-box,
USB Smart Moto,
iQ Box, G.O.T etc)
-
1.) Connect UBL Easy TP to phone's keypad
connector
-
2.) Press and keep RED
button pressed
-
3.) Connect USB cable, and power
to phone (you can power with phone battery or easier with
TestPoint Box)
-
4.) phone will then be found in bootmode, just as
if you had cut access to the testpoint under the metal shield
-
5.) Release Red Button
-
5.) Unlock / service the phone as usual
How To Use With
Smart-Clip
-
1.) Connect UBL Easy TP to phone's keypad
connector
-
2.) Press and keep RED
button pressed
-
3.) Connect USB cable, and power
to phone (you can power with phone battery or easier with
TestPoint Box)
-
4.) Press Search & phone will then
be found as blank, just as
if you had cut access to the testpoint under the metal shield
-
4.) Unlock / service the phone as usual
|
|
| |
Shared Left Border
|
